iDrive Motor Controller

Link4 iDrive Motor Controllers deliver smart, reliable motor control for natural ventilation in commercial grow environments.

Key Benefits:

  • Automates ridge, sidewall, and curtain vents
  • Compatible with 24VDC, 120VAC, 240VAC, and 480VAC motors
  • Manual, automatic, or thermostat-controlled operation modes
  • Mounts easily in tight greenhouse spaces
  • Manual override & motor-reverse delay
  • UL/cUL approved and built to industry standards
  • Integrates with Link4’s iGrow and Pearl controllers

Choose your Electrical Current:

AC (High-Power Motor Controls)

DC (Low-Voltage Equipment Controls)

Bring advanced automation into your facility

Ridder Motors – Wiring a Ridder Motors

Overview of the iDrive

Daisy-Chaining iDrives

VIEW MORE
  • Motor types: 24VDC, 120VAC, 240VAC, 480VAC
  • Modes: Manual, Timed, Sensor-Based
  • Safety: Current sensing overload protection
  • Installation: DIN rail or wall mount options
  • 8 x 6 x 4 Enclosure
  • Available as single or dual drives
  • Phase: Single or three-phase capable
  • Wires: 3 or 5-wire motors
1. Can I run multiple vents with one iDrive Motor Controller?

Each unit controls one motor—use multiple iDrives for multi-vent setups.

2. Can I switch between manual and auto control?

Absolutely—use the 5-position switch for manual or thermostat modes.

3. Is installation difficult?

Not at all—it’s compact, pre-wired, and designed for simple mounting.

4. Will it fit my motor type?

Yes—it supports both common 120 V AC and 24 V DC motors.

5. Does iDrive support motor position feedback?

No, iDrive is a current-sensing controller that does not rely on external feedback like potentiometers or encoders.

6. Can I schedule vent movements based on time or temperature?

Yes, if you're using the iDrive model with a timer, you can schedule vent movements based on time.

If you're using the standard model, venting is controlled by a thermostat or manual switch, not time.

7. Is iDrive weather-resistant for outdoor installations?

No, iDrive should be installed in a weather-protected area or inside a sealed control box to prevent moisture damage.

8. Can I manually override the system if needed?

Yes, iDrive includes manual override functionality for direct control during maintenance or emergencies.

9. What happens if power is lost mid-cycle?

The iDrive retains its last position and settings during outages, so vents won’t reset unexpectedly when power returns.

10. Does the controller come pre-configured, or do I need to program it before use?

The iDrive comes with a default configuration for standard venting. However, settings can be adjusted during installation to match your greenhouse system.

0