Indoor Controls
iGrow 1800 Advanced Grow Room Controller
- Advanced control, affordable price
- 24VAC intelligent controlled outputs
- Advanced irrigation (VDP or Soil Moisture Content)
- Advanced lighting control (DLI)
- Providing the plant what it needs for maximum yield while greatly reducing manual labor
- UL Listed for safety and easy permits
The iGrow 1800 offers the finest in outdoor greenhouse and indoor hydroponics experience. With the iGrow 1800, you can increase productivity while reducing energy use and operating costs. The iGrow 1800 series offers 24VAC intelligent controlled outputs for fans, heaters, vents, irrigation, supplemental light and DLI, shade curtains (blackout curtains), and more.
Combine the iGrow 1800 with the iDoser to automate dosing and fertigation.
LinkConn Software
Link4’s LinkConn software makes controlling your greenhouse easier than ever. Unlike large cumbersome PC interfaces, or very basic limited ones, LinkConn gives you total control over your growing operations in a format that makes sense to growers. The typical learning curve for LinkConn software can be measured in minutes. The speed at which you can review greenhouse status and make detailed changes can be measured in seconds. The layout is so friendly that even when you aren’t making changes often, it only takes a few minutes to find what you’re looking for. Whether you have one or one hundred greenhouses, LinkConn manages them all the same in a simple and easy manner from one location.
Smart Irrigation
The iGrow 1800 uses a VPD (Vapor Pressure Deficit) feeding system or Smart Irrigation Sensors. VPD saves nutrients by preventing over-watering and makes sure the plants always have as much water as they need. This is a unique benefit as it’s designed to conserve water.
Smart Lighting (Daily Light Integral)
The iGrow 1800 offers DLI intelligence. DLI intelligence controls your greenhouse’s grow lights to give the exact amount of light needed for success. DLI intelligence conserves energy by using sunlight whenever possible.
Auxiliary Controls
The iGrow’s 1800 auxiliary controls are flexible and user defined to control conditions to fit your unique growing requirements. Auxiliary controls can be expandable to 36 outputs on a single controller.
Why being UL Listed is important for your safety
In the United States and Canada, this product is Listed by UL. Representative samples of this product have been evaluated by UL and meet applicable safety standards.
iPonic Commercial Controller
- Increase yields, lower electricity bill, save money
- Use your smartphone to monitor and change settings
- Have peace of mind with alerts for temperature, humidity, CO2, and more
- Pre-mounted, pre-wired, and pre-tested
- Suitable for 120v, 240v, 277v, 480v; up to 18 amps per circuit
- Integrates into any size UL Listed contactor or lighting panel
- NEMA4 enclosure; DISM sensor included
The iPonic 614 and 624 Commercial controllers are designed for your convenience – pre-mounted, pre-wired, and pre-tested. Pre-mounted means an easier and cheaper installation process. There is no need for separate boxes with connecting conduits. Pre-wired means it works as soon as you take it out of the box.
The iPonic Commercial enables growers to control a single or dual zone – with cloud-access from any Internet-connected computer or smartphone.
Unlike most controllers on the market, the iPonic Commercial controller allows total flexibility using software-based intelligence. This means that you can program all functions together and eliminate multiple controllers for multiple functions. The iPonic does it all: Fuzzy Logic CO2, light timer, irrigation, temperature, humidity, recycle timers, vent fans, high temperature shut-off, central air conditioning, and heating. You can even add your own custom devices. This also means that you can change devices on the fly and add or delete devices to match the equipment in your grow house in minutes.
Controller includes a single (or dual) Digital Integrated Sensor Module (DISM). The sensor measures temperature, humidity, CO2, and lighting.
Remote Cloud Access
Growers can monitor and change every aspect of the iPonic Commercial from the palm of their hand, using state-of the-art controls that relay secured, encrypted grow house data to the cloud where it is accessible on any Internet-connected device. The secured, encrypted server allows you to monitor and change settings remotely. With a wealth of data at their fingertips, growers are able to grow bigger, more vibrant crops under repeatable processes. No data collected by the iPonic Cloud is shared to a third party. Additionally, any location data we collect is anonymous and cannot be associated with a user account.
Digital Integrated Sensor Modules (DISM)
The iPonic Commercial includes a single Digital Integrated Sensor Module (DISM). The sensor measures temperature, humidity, CO2 and lighting and is connected by a standard 16-foot cable. It is recommended that the sensor is hung in a central location within the grow facility. Ideally, you will want to hang the module near the crop level, close to the center of the controlled environment to get accurate readings. You may want to keep the module away from irrigation emitters, unit heaters and any other type of equipment that may affect the accuracy of the sensor.
Fully Automated Control of the Entire Growth Cycle
The iPonic Commercial allows you to control each device individually with manual settings or fully automatically with all devices working together. Entire growth cycle settings can be programmed and saved on the removable USB thumb drive. This allows you to run custom growth cycles with programmed settings for every device on a week by week basis. These programs can be saved and even shared with other growers.
Loss Prevention
- The iPonic Commercial controller protects your grow house investment with SMS text and email that will notify you of a variety of threats, including spikes in temperature, humidity, and CO2.
- Emergency shut-off guards against power surge and overheating.
Privacy and Security
- Network architecture built to meet the requirements of the most security-sensitive organizations.
- No data collected by the iPonic Cloud is shared to a third party.
- User location data collected is anonymous and cannot be associated with a user account.
- Tor and Anonymity Online Compatible
- No backdoor access; https secure
Why being UL Listed is important for your safety
In the United States and Canada, this product is Listed by UL. Representative samples of this product have been evaluated by UL and meet applicable safety standards.
iPonic 624 Hydroponic Controller
- Everything you need to control a small or medium sized indoor facility
- Use your smart phone to monitor and change settings
- Have peace of mind with alerts for temperature, humidity, CO2, more
- Everything you need to control two zones with 2 sensors
The iPonic hydroponic environmental controller enables growers to control a grow environment with Cloud-based access from any Internet-connected computer or smartphone.
Unlike most controllers on the market, the iPonic controller allows you to program all functions together and eliminate the need for multiple controllers. The iPonic does it all: Fuzzy Logic CO2, light timer, temperature, humidity, recycle timers, vent fans, high temperature shut-off, irrigation, central air conditioning, and heating. Versality of the controller allows you to even add your own custom devices, which you can change on the fly – add or delete devices to match the equipment in your grow house in minutes.
The iPonic 624 is a dual-zone controller that shares 8 120-volt outlets between both rooms. The controller comes with dual Digital Integrated Sensor Modules (DISM) for full independent control of each room.
Remote Cloud Access
Growers can monitor and change every aspect of the iPonic 624 from the palm of their hand, using state-of the-art controls that relay secured, encrypted grow house data to the cloud where it is accessible on any Internet-connected device. The secured, encrypted server allows you to monitor and change settings remotely. With a wealth of data at their fingertips, growers are able to grow bigger, more vibrant crops under repeatable processes. No data collected by the iPonic Cloud is shared to a third party. Additionally, any location data we collect is anonymous and cannot be associated with a user account.
Fully Automated Control of the Entire Growth Cycle
The iPonic controller allows you to control each device individually with manual settings or fully automatically with all devices working together. Entire growth cycle settings can be programmed and saved on the removable USB thumb drive. This allows you to run custom growth cycles with programmed settings for every device on a week by week basis. These programs can be saved and even shared with other growers.
Loss Prevention
- The iPonic 624 controller protects your grow house investment with SMS text and email that will notify you of a variety of threats, including spikes in temperature, humidity, and CO2.
- Emergency shut-off guards against power surge and overheating.
Privacy and Security
- Network architecture built to meet the requirements of the most security-sensitive organizations.
- No data collected by the iPonic Cloud is shared to a third party.
- User location data collected is anonymous and cannot be associated with a user account.
- Tor and Anonymity Online Compatible
- No backdoor access; https secure
iPonic 614 Hydroponic Controller
- Everything you need to control a small indoor facility
- Use your smart phone to monitor and change settings
- Have peace of mind with alerts for temperature, humidity, CO2, and more
- Optimal one zone controller
The iPonic 614 hydroponic environmental controller enables growers to control a grow environment with Cloud-based access from any Internet-connected computer or smartphone.
Unlike most controllers on the market, the iPonic controller allows you to program all functions together and eliminate the need for multiple controllers. The iPonic does it all: Fuzzy Logic CO2, light timer, temperature, humidity, recycle timers, vent fans, high temperature shut-off, irrigation, central air conditioning and heating. Versality of the controller allows you to even add your own custom devices, which you can change on the fly – add or delete devices to match the equipment in your grow house in minutes.
The iPonic 614 is a single-zone controller that includes 8 120-volt outlets of which six are fully programmable. They are available for a combination of devices such as central air conditioning, heaters or any device with a remote thermostat connection. Controller includes a single Digital Integrated Sensor Module (DISM) that measures temperature, humidity, CO2 and lighting.
Remote Cloud Access
Growers can monitor and change every aspect of the iPonic 614 from the palm of their hand, using state-of the-art controls that relay secured, encrypted grow house data to the cloud where it is accessible on any Internet-connected device. The secured, encrypted server allows you to monitor and change settings remotely. With a wealth of data at their fingertips, growers are able to grow bigger, more vibrant crops under repeatable processes. No data collected by the iPonic Cloud is shared to a third party. Additionally, any location data we collect is anonymous and cannot be associated with a user account.
Fully Automated Control of the Entire Growth Cycle
The iPonic controller allows you to control each device individually with manual settings or fully automatically with all devices working together. Entire growth cycle settings can be programmed and saved on the removable USB thumb drive. This allows you to run custom growth cycles with programmed settings for every device on a week by week basis. These programs can be saved and even shared with other growers.
Loss Prevention
- The iPonic 614 controller protects your grow house investment with SMS text and email that will notify you of a variety of threats, including spikes in temperature, humidity, and CO2.
- Emergency shut-off guards against power surge and overheating.
Privacy and Security
- Network architecture built to meet the requirements of the most security-sensitive organizations.
- No data collected by the iPonic Cloud is shared to a third party.
- User location data collected is anonymous and cannot be associated with a user account.
- Tor and Anonymity Online Compatible
- No backdoor access; https secure
iPonic Alert
- Cloud-based monitoring and alarm system
- Monitor current environmental conditions with any smart phone or Internet-connected device
- Receive email and text alerts right to your phone
- Monitor temperature, humidity, CO2, and lighting
Available in single room (614) or two room (624) options, the iPonic Alert is a cloud-based monitoring and alarm system. With simple plug-and-play functionality, any grower can learn what is going on in their grow room from any Internet connected device. The iPonic Alert is ideal for the cultivator that is satisfied with their current controls but wants the extra assurance of push notifications sent to their smart phone in the event anything should go wrong.
The iPonic Alert comes with a Digital Integrated Sensor Module (DISM) that provides temperature, CO2, light, and humidity monitoring from one easy to install device.
Remote Cloud Access
Growers can monitor every aspect of the iPonic Alert from the palm of their hand, using state-of the-art controls that relay secured, encrypted grow house data to the cloud where it is accessible on any Internet-connected device. The secured, encrypted server allows you to monitor settings remotely. No data collected by the iPonic Cloud is shared to a third party. Additionally, any location data we collect is anonymous and cannot be associated with a user account.
Digital Integrated Sensor Modules (DISM)
The iPonic Alert includes a single Digital Integrated Sensor Module (DISM). The sensor monitors temperature, humidity, CO2 and lighting and is connected by a standard 16-foot cable. It is recommended that the sensor is hung in a central location within the grow room facility. Ideally, you will want to hang the module near the crop level, near to the center of the controlled environment to get accurate readings. You may want to keep the module away from irrigation emitters, unit heaters and any other type of equipment that may affect the accuracy of the sensor.
Loss Prevention
- The iPonic 614 protects their grow house investment with SMS text and email identifying a variety of threats, including spikes in temperature, humidity, and CO2.
- Emergency shut-off guards against power surge and overheating.
Privacy and Security
- Network architecture built to meet the requirements of the most security-sensitive organizations.
- No data collected by the iPonic Cloud is shared to a third party.
- User location data collected is anonymous and cannot be associated with a user account.
- Tor and Anonymity Online Compatible
- No backdoor access; https secure