Irrigation and VPD
Is your air too wet or too dry?
VPD tells you how hard the air pulls water from your plants. Learn it, check it, then water by it.
Video 1
VPD, explained
About 2 minutes. What VPD is, why humidity alone can fool you, and what too wet and too dry do to a crop.
The VPD chart
Find your temperature. Find your humidity.
The number where they meet is your VPD, in kPa. Pick a crop to see its typical range. Tap a square to send it to the VPD check.
Across: humidity, %. Down: air temperature.
The VPD check
Check your air, your setpoints, your year and your watering.
Pick your crop and stage. Then choose what you want to check.
Or drag the dot on the map.
Your VPD right now
kPa
What the colors mean, in kPa
The humidity to set for each period
The Pearl holds up to six setpoint periods a day. Enter the temperature for each one.
What your outside air gives you, month by month
Pick your region to see your year.
VPD of outside air brought to your temperatures, in kPa. If it is hotter outside than your setting, it uses the outside temperature. Your plants add water to the air, so a real house runs a little wetter.
A starting point for your VPDi threshold
kPa-Hr
Estimates only. This tool uses standard formulas, air temperature and humidity, typical crop ranges, and long term average dew points for one spot in each region. Leaves in bright sun run warmer than the air, and your house, weather, crop and sensors will differ. This is a rough guide, not a growing plan and not a promise of crop results. Check with Link4 or your crop adviser before you change your settings. Link4 Corporation accepts no liability for decisions made from these estimates. Crop ranges are typical figures; growers set their own. Weather data: NASA Langley Research Center POWER Project, funded through the NASA Earth Science Applied Science Program.
Video 2
How to use the chart and the check
About 2 minutes. Read the chart, then walk through each part of the VPD check.
Video 3
VPD and VPDi: which one waters?
About 2.5 minutes. VPD is the reading right now. VPDi is what has added up since the last watering. One sets your climate. The other tells you when to water.
Video 4
Watering by VPD
About 2 minutes. One day of watering by VPDi, the settings on the channel page, and how growers find their threshold.
Video 5
VPD and light work together
About 2 minutes. Light opens the plant's pores. VPD sets how fast water leaves through them.
Link4 for irrigation
Two ways to water by VPD

HydroRoot 16
- An irrigation controller for up to 16 valves.
- Water on a schedule, in cycles, or by VPD.
- VPD mode needs its temperature and humidity sensor.

Pearl
- Climate and irrigation on one controller.
- It works out VPD from the zone's temperature and humidity. No extra sensor.
- Set humidity for up to six periods a day.
Your next step
Want to water by VPD?
Tell us what you grow and how you water now. We will tell you how we would set it up.
(866) 755-5465
Or contact us, or ask your Link4 dealer.
We make growing easier.